DC 24V PLC Regulator FX1N-20MR Industrial Control Board Programmable Logic Controller
Features:
-
This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
-
-
High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
-
-
Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
-
-
Programming port is the port for program upload, download, test and monitor.
-
-
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
Model: FX1N-20mr
Working Voltage: DC24(V)
Wide Power Supply Voltage: 10-28VDC
Baud Rate: 9600
Programming Software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120G
Package Included:
1 x PLC Board
Chinese programming software download address:Pan.baidu.com/s/1nty5XXn
PLC data download address: Pan.baidu.com/s/1eRNhn3O
Module function:
This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:
-
Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
-
-
When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
-
-
The power supply is switched on, the relay 1, 2 have no action, when a or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
-
-
Through the 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
-
-
When the 1 has a , the relay 1 is closed, the relay 2 is disconnected; when the 2 has a , the relay 1 is turned off, and the relay 2 is closed.
-
-
Can be connected to the NPN sensor , the sensor programming, to achieve arbitrary control of the relay.
-
-
When the 1 is triggered, the relay 1 is controlled, and when the 2 is triggered, the relay 2 is controlled.
-
-
Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
-
-
When the 1 has a , the motor is controlled to rotate; when the 2 has a , the motor is reversed.
-
Input high speed pulse C235, C251 and FX1N compatible.
-
-
Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.
-
The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
-
-
Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
-
-
Built-in Analog output DA, corresponding to internal data register D5101.
-
-
When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.
Assistant Relay |
Normal Use |
M0 – M383 |
Hold After Power Off |
M384-M1535 |
|
Special Use |
M8000-M8255 |
|
State |
Holding Use |
S0-S999 |
Timer |
100MS |
T0-T199 |
10MS |
T200-T245 |
|
1MS |
T246-T249 |
|
100MS accumulation |
T250-T255 |
|
Counter |
16-bit |
C0-C15(0-32767) |
16-bit(Hold After Power Off) |
C16-C199 |
|
High Speed(Hold After Power Off) |
C200-C255 |
|
Data Register |
16-bit |
D0-D127 |
16-bit(Hold After Power Off) |
D128-D5029 |
|
16-bit Special Use(AD) |
D5030(Output Voltage: 0-10V) |
|
16-bit Special Use(DA) |
D5101(Output Voltage: 0-3.3V) |