50Pcs Tile Leveling System Kit Tile Installation Tools with Tile Leveler Spacers 2 Special Wrenches for Construction Building Walls Floors
Special wrench: 151*25*10mm
Tile leveler spacers: 74*36*36mm
Material: PP+manganese steel
Applicable size: for 5mm to 16mm thickness of the tile, suitable for tile gap ≥1.5mm
50 x tile levelers
2 x special wrenches
– Function: Ideal for floor or wall setting, ensuring flatness between tiles and avoiding movements during the mortar setting.
– Applicable sizes: Suitable for tile gap ≥1.5mm and or 5mm to 16mm thickness of the tile.
– Durable: Made of thick PP plastic and manganese steel, they are reusable, durable, wear-resistant.
– Easy to use: They can be easily fix or remove with special wrench. (The special wrenches are included).
– Convenient to use: They are crafted to be easily installed, reducing the need for grinding and polishing.
– Easy to use:
1. Lay the first piece of brick, seam ≥1.5mm, and close to second bricks, insert the T-pin along the crack.
2. Rotate it 90 degrees.
3. Clamp the T-pin at the bottom of the two bricks.
4. Tighten the adjusting cover.
5. Before the cement or tile glue has completely dried up (less than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees to make the T-pin turns to a zigzag parallel to the tile.
6. Remove the leveler.
7. Clean and dry storage for next use.
1. Suitable for tile gap ≥1.5mm and or 5mm to 16mm thickness of the tile.
2. Clean the residues around the tiles and t-pin when operating.
3. Before the cement or tile glue has completely dried up (less than than 6 hours), removing the T-needle.
1. Please allowed 1-3mm differences due to manual measurement, thank you!
2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.